Accessories
UNDERGROUND CONDUIT SPACERS CU 1600-96F
CONDUIT MANDRELS TYPE I AND TYPE III CU 1600-96K
PULL ROPE REQUIREMENTS CU 1600-96L
SOLVENT CEMENT JOINING AND PVC PLASTIC CONDUIT INSTALLATION CU 1600-96M
LADDER FOR VAULT CU 1600-97
SUMP PUMP INSTALLATION IN VAULTS CU 1700-5
VENTILATION FOR VAULTS CU 1700-6
ACCESSIBLE GROUND CONNECTION THRU VAULT VENTS CU 1700-7
BASIC VAULT GROUNDING DETAILS CU 1700-31
69 KV CABLE RACKING CU 1700-32
69 KV CABLE AND 3 KV SURGE ARRESTER RACKING DETAILS CU 1700-34
PULLING EYE, COMPRESSION, FOR SINGLE CONDUCTOR ALUMINUM OR COPPER U.G. CABLE CU 1700-35

Ducts and Conduits
UNDERGROUND TRENCH DETAILS RESIDENTIAL DEVELOPMENT CU 1500-3A
UNDERGROUND CONDUIT INSTALLATION REQUIREMENTS GUIDELINE CU 1600-4
APPROVED CONDUIT TYPES, SIZES, AND APPLICATION CU 1600-4A
EXCAVATION FOR SUBSTRUCTURES CU 1600-4B
CONDUIT RUN SLOPING REQUIREMENTS CU 1600-96A
UNDERGROUND CONDUIT BANK, INSTALLATION IN BORE CASING CU 1600-96E
UNDERGROUND CAPPING MAIN LINE DUCT CU 1600-96G
PLUGGING CONDUITS CU 1600-96H

Frames and Covers
VAULT NECK AND COVER DETAILS CU 1600-3C
TYPICAL VAULT COVER AND BASE SETTING DETAILS CU 1600-4D

General Information
COMMERCIAL SERVICES METHOD AND REQUIREMENTS CU 1500-5
CUSTOMER INSTALLED U.G. ELECTRIC SERVICE TO SPRINKLER CONTROLLERS CU 1600-26

Miscellaneous Structures
RETAINING WALL CU 1600-6
PROTECTIVE POSTS CU 1600-9

Padmount
SINGLE PHASE PADMOUNT TRANSFORMER, 48” X 54” TRANSFORMER PAD CU 1500-34
6’ X 9’-6” SLAB TOP, CABLE BOX AND SAFETY COVER FOR PME & PMC CABINET CU 1600-1A
4’ X 4’-6” SLAB TOP WITH 2’ X 3’ CABLE BOX FOR PMC-3 OR PMC-4 (DFC) SWITCH CABINET CU 1600-1D
12 KV PADMOUNT CAPACITOR CABINET, INSTALLATION REQUIREMENTS CU 1600-2
PRECAST TUB-TYPE PMC, 5’ WIDE X 10’-6” LONG X 7’ HIGH CU 1600-3J
12 KV PADMOUNT SWITCH VAULT INSTALLATION AND CONDUIT ARRANGEMENT CU 1600-5
PMV PADMOUNT SWITCH, PAD/VAULT, 8’ X 10’ X 7’ DEEP CU 1600-18
TRANSFORMER PAD WITH CABLE BOX FOR 12 KV 3 PHASE PADMOUNT TRANSFORMERS CU 1600-20
6.9 KV SINGLE PHASE FUSE CABINET, 34” X 40” PAD INSTALLATION CU 1600-61

Pull Boxes
13” X 24” PULL BOX AND COVER DETAILS CU 1500-1A
17” X 30” PULL BOX AND COVER DETAILS CU 1500-1B
2’ X 3’ AND 2’-6” X 4’ PULL BOX WITH DEEP RECESS END WALL KNOCKOUTS CU 1600-3A
2’ X 3’ AND 2’-6” X 4’ PULL BOX WITH FLUSH KNOCKOUTS CU 1600-3B
4’ X 4’ VAULT WITH COVER FOR 12 KV JUNCTIONS CU 1600-14A

Subsurface Transformer Enclosures
URD TRANSFORMER HOLE LINER AND SECONDARY SERVICE PULL BOX LOCATION CU 1500-3
URD TRANSFORMER HOLE LINER INSTALLATION CU 1500-3B
URD TRANSFORMER CONCRETE HOLE LINER CU 1500-9
URD TRANSFORMER PLASTIC HOLE LINER CU 1500-9B

Vaults
UNDERGROUND VAULT, 4’ X 7’ X 6’-6” AND 5’ X 8’-6” X 6’-6” CU 1600-3D
DISTRIBUTION VAULT, 8’ X 14’ X 9’-4” DEEP, PARKWAY OR TRAFFIC INSTALLED CU 1600-3F
8’ X 10’ X 7’-6” DEEP DISTRIBUTION VAULT CU 1600-3G
DISTRIBUTION VAULT, 8’ X 20’ X 9’-4” DEEP, PARKWAY OR TRAFFIC INSTALLED CU 1600-3H
8’ X 14’ X 9’-4” FLAT WALL DISTRIBUTION VAULT WITH 5’ X 8’ OPENING CU 1600-3K
8’ X 20’ X 9’-4” FLAT WALL DISTRIBUTION VAULT WITH 5’ X 8’ OPENING CU 1600-3L
5’ X 5’ VAULT WITH HINGED COVER FOR 12 KV SUBMERSIBLE SWITCH CU 1600-15B
8’ WIDE X 14’, 16’ OR 20’ LONG X 9’-6” DEEP TRANSMISSION TUB VAULT CU 1600-95B
8’ WIDE X 14’, 16’ LONG X 7’-6” DEEP TRANSMISSION TUB VAULT CU 1600-95E

Residential Services
RESIDENTIAL SERVICES, METHOD AND REQUIREMENTS CU 1500-2 
URD SERVICES RESIDENTIAL, OVERHEAD TO UNDERGROUND ELECTRIC SERVICE CONVERSION CU 1500-2D

Street Lights (Specification)

Street Light (Construction Standards)

Minimum Clearance between Conductors & Street Light Poles L 101
Method of providing Clearances With Arm-End Clearance Bracket L 102
Underground Street Lights and Installation Requirements L 103
Connection Details Underground Street Light Systems L 104
Design No. 733 Single Arm L 116
Design No. 736 Single and Double Arm L 119 
Design No. 738 Anaheim Hills Area L 121
Design No. 739 Anaheim Hills Area L 122
Traditionaire Luminaire Details L 123
Luminaire Rectilinear, H.P.S. Downtown Redevelopment Area L 126  
Design No. 740 Downtown Redevelopment Area L 127
Method of Identification- Street Light Marbelite and Metal L 128
City of Anaheim Street Light Design No. 742 & 742A L 129
*ANAHEIM COLONY HISTORIC DISTRICT
City of Anaheim Ornamental Luminaire Detail L 129-3
City of Anaheim Street Light Design No. 743 L 130
City of Anaheim Street Light Special Design No. 744 L 131
*ANAHEIM RECREATIONAL AREA
City of Anaheim Street Light Special Design No. 745 L 132
City of Anaheim Street Light Special Design No. 746 L 133
City of Anaheim Street Light Special Design No.747 L 134
Wood Pole Mounted Cobra Head Luminaire L 135
Spacing For High Pressure Sodium Luminaire L 136
High Pressure Sodium Street Light Characteristics L 137
City of Anaheim Street Light Special Design No. 748 L 138
City of Anaheim Street Light Special Design No. 749 L 139
City of Anaheim Street Light Special Design No. 750 L 140
City of Anaheim Street Design No. 760 Platinum Triangle L 141
City of Anaheim Street Light Design No. 761 L 142
*CLEMENTINE STREET
13”x24” Pull Box and Cover Details CU 1500-1A (Sh. 1 only)
Underground Trench Details Residential Development CU 1500-3A (Sh. 1&2)
Excavation for Structures CU 1600-4B
Plugging Conduits CU 1600-96H (Sh. 1&2)
Grounding Materials Ground Rod and Clamps CO 782 (Sh. 1&2)
Street Light Card EL-18